This series of products uses polyester resin and epoxy resin as the main base material to make thermosetting powder coating.
Makwinya osiyanasiyana, zitsulo, zotsatira za ngale ndi mitundu yosakanikirana, etc.
Suitable for coating of various indoor products, widely used in any indoor purposes such as furniture, household appliances, industrial equipment, sports equipment, toys, hardware machinery, store shelves, lamps, etc.
Katoni ma CD, alimbane ndi zigawo ziwiri za polyvinyl kolorayidi matumba apulasitiki, kulemera ukonde wa bokosi lililonse ndi 20kg. Zinthu zosakhala zoopsa zimatha kunyamulidwa m'njira zosiyanasiyana, koma ziyenera kusungidwa kutali ndi dzuwa, chinyezi ndi kutentha, komanso kukhudzana ndi mankhwala.
Ogwira ntchito ayenera kuvala zophimba fumbi panthawi yomwe akugwiritsidwa ntchito kuti apewe kutulutsa fumbi komanso kuchepetsa kukhudzana kwanthawi yayitali pakati pa khungu ndi utoto. Utoto wophatikizidwa pakhungu ukhoza kutsukidwa ndi sopo.
| Mphamvu yapadera | 1.4~1.8g/cm3 (depending on the formulation and color) |
| Tinthu tating'ono | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Zinthu zosasinthika | |
| Kufewetsa | 60~95℃ varies depending on the color gloss |
| Kukhazikika kosungira | Epoxy/polyester powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Zinthu zoyesera | Kuyendera muyezo kapena njira | Inspection index |
| Maonekedwe | Kuyendera kowoneka | Zosiyanasiyana gulu pamwamba zotsatira |
| Zotsatira | GB / T 1732 | ≥50Kg·cm |
| Kusungunuka | GB / T 6742 | ≤2mm |
| Kukwapula | GB / T 9753 | ≥8mm |
| kuuma | GB / T 6739 | ≥H~2H |
| guluu wolimba | GB / T 9286 | Mzere wa 0 |
| Samva kupopera mchere | GB / T 1771 | 500h; Malo olembedwa: dzimbiri la unidirectional ≤2.0mm; Malo osalembedwa: palibe cholakwika |
| Chinyezi ndi kukana kutentha | GB / T 1740 | 500h Palibe zachilendo |
| Kujambula | Poor light resistance, not recommended for outdoor use | |
| Zizindikiro zomwe zili pamwambazi zitha kuchepa pang'ono pomwe gloss imachepa. | ||
| Kuwaza | Mndandanda wa mankhwala ndi oyenera kupopera mbewu mankhwalawa njira: corona electrostatic kupopera mbewu mankhwalawa; kukangana electrostatic kupopera mbewu mankhwalawa; electrostatic fluidized bedi kupopera mbewu mankhwalawa; fluidized bedi otentha dip ❖ kuyanika. | |
| Makulidwe a zokutira: Gwiritsani ntchito ma microns 40 ~ 150, makulidwe a filimu olimbikitsa ndi ma microns 50 ~ 80. Avereji Kuphunzira: 10 ~ 12 masikweya mita/kg, filimu makulidwe 60 microns (mawerengedwe kutengera 100% mlingo ntchito) | ||
| Kuchiritsa zinthu | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 140℃/30 minutes, 160℃/20分钟，180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
