This series of products uses saturated polyester resin and Primid curing agent as the main base material to make thermosetting powder coatings.
Kumamatira kwabwino komanso makina abwino;
Smooth coating film and high gloss;
Good chemical and corrosion resistance;
Higher storage stability and shelf life than TGIC type.
Makwinya osiyanasiyana, zitsulo, zotsatira za ngale ndi mitundu yosakanikirana, etc.
Oyenera kupaka zinthu zosiyanasiyana zowululidwa panja kwa nthawi yayitali: monga zida zapakhomo, mbiri ya aluminiyamu yomanga, zoyendera, mabwalo amasewera, zida zapabwalo, ndi zina zambiri.
Katoni ma CD, alimbane ndi zigawo ziwiri za polyvinyl kolorayidi matumba apulasitiki, kulemera ukonde wa bokosi lililonse ndi 20kg. Zinthu zosakhala zoopsa zimatha kunyamulidwa m'njira zosiyanasiyana, koma ziyenera kusungidwa kutali ndi dzuwa, chinyezi ndi kutentha, komanso kukhudzana ndi mankhwala.
Ogwira ntchito ayenera kuvala zophimba fumbi panthawi yomwe akugwiritsidwa ntchito kuti apewe kutulutsa fumbi komanso kuchepetsa kukhudzana kwanthawi yayitali pakati pa khungu ndi utoto. Utoto wophatikizidwa pakhungu ukhoza kutsukidwa ndi sopo.
| Mphamvu yapadera | 1.4 ~ 1.8g/cm' (malingana ndi chilinganizo ndi mtundu) |
| Tinthu tating'ono | Depending on the application, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5% |
| Kukhazikika kosungira | Polyester/Primid type powder coatings should be stored in a dry, ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for more than 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
| Zinthu zoyesera | Kuyendera muyezo kapena njira | Inspection index |
| Maonekedwe | Kuyendera kowoneka | Zosiyanasiyana gulu pamwamba zotsatira |
| Zotsatira | GB / T 1732 | ≥50Kg·cm |
| Kusungunuka | GB / T 6742 | ≤2mm |
| Kukwapula | GB / T 9753 | ≥8mm |
| kuuma | GB / T 6739 | ≥H~2H |
| guluu wolimba | GB / T 9286 | Mzere wa 0 |
| Mchere wosalowerera ndale | GB / T 1771 | 500h; Malo olembedwa: dzimbiri la unidirectional ≤2.0mm; Malo osalembedwa: palibe cholakwika |
| Chinyezi ndi kukana kutentha | GB / T 1740 | 500h Palibe zachilendo |
| Kukana kukalamba kwanyengo | GB / T 1865 | 800h; Kusintha kwamtundu ≤2 mulingo; Kutaya kwa gloss ≤2 mulingo |
| Zizindikiro zomwe zili pamwambazi zitha kuchepa pang'ono pomwe gloss imachepa. | ||
| Kuwaza | Mndandanda wa mankhwala ndi oyenera kupopera mbewu mankhwalawa njira: corona electrostatic kupopera mbewu mankhwalawa; kukangana electrostatic kupopera mbewu mankhwalawa; electrostatic fluidized bedi kupopera mbewu mankhwalawa; fluidized bedi otentha dip ❖ kuyanika. | |
| Makulidwe a zokutira: Gwiritsani ntchito ma microns 40 ~ 150, makulidwe a filimu olimbikitsa ndi ma microns 50 ~ 80. Avereji Kuphunzira: 10 ~ 12 masikweya mita/kg, filimu makulidwe 60 microns (mawerengedwe kutengera 100% mlingo ntchito) | ||
| Kuchiritsa zinthu | 180℃/10 minutes is recommended, and it can also be designed according to user needs: 160C/15 minutes, 170℃/12 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
