Epoxy Anti-Corrosion Powder Coating for Safe Drinking Water Pipes

Surface Finish Options Overview

mankhwala Introduction:
This product is formulated using special epoxy resin, dedicated curing agents, nano-grade antimicrobial agents, and food-grade pigments and fillers. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior and durable antimicrobial effects, flexibility, and impact resistance.

Kugwiritsa Ntchito Zogulitsa:
Suitable for municipal drinking water supply pipes.

Zambiri Zamalonda:

Excellent adhesion to the substrate.Good leveling and high gloss on the coating surface.Strong resistance to permeation and corrosion.High surface hardness and dense coating.Superior high-temperature cathodic disbondment resistance.Good mechanical properties and extremely strong flexibility.Low melting temperature, high reactivity, and high curing completion rate.The product has passed the EU WRAS water safety certification and meets the safety evaluation standards for materials in contact with drinking water.

Ufa Magwiridwe:

katundu	mfundo	zolemba
Mphamvu zamakina	High	Ensures durability and resistance to mechanical stress
Shrinkage	Low	Minimizes dimensional changes during curing, maintaining precision
Processing Magwiridwe	Excellent dispersibility and lubricity	Facilitates smooth molding and reduces wear on molds
Zida Zamagetsi	High glass transition temperature, wide operating temperature range	Ensures stable performance across a broad temperature spectrum
Zida za Dielectric	Excellent chemical and solvent resistance	Protects against degradation from chemical exposure
Ntchito Zachilengedwe	100% solid content, no harmful substances	Complies with environmental regulations and promotes sustainability

Kuchiritsa Zinthu:

katundu	mfundo	zolemba
kutentha	Referenced to workpiece temperature	Deviations may affect performance; ensure accurate temperature control for optimal results

Magawo Ntchito:

chizindikiro	mfundo	zolemba
Zida Zogwiritsidwa Ntchito	Frictional charging spray, corona electrostatic spray, dip coating, roll coating
Kutayika kwa Mafilimu	200-600um	Zosinthika malinga ndi zofunikira za workpiece

Health and Safety:

katundu	mfundo	zolemba
Toxicity	Zopanda poizoni	Safe for handling and application
Kutentha	Zosapsa	Reduces risk in storage and use
lamulo	GB15607-1995	Follow safety protocols for coating operations

CHENJEZO:

katunduyo	mfundo	zolemba
Kugwiritsa Ntchito Kunja	Zosavomerezeka	May cause fading and chalking
Kukonzekera kwapamwamba	Oil-free, water-free, surface treatment to Sa21/2 level (GB/T8923), anchor pattern depth 40-100um, clean surface from dust and abrasives
Kutentha	Temperature controlled between 180-230°C
yosungirako	Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed	Ensures product stability and prevents degradation
Kuchiritsa Kutentha	Preheat steel pipe surface to above 200°C for better curing completion rate
Mixing Powders	Do not mix with other anti-corrosion powders or recycled powders. Thoroughly clean the spraying equipment when changing colors to ensure drinking water safety and meet EU WRAS water safety standards
Compliance	Meets EU WRAS water safety standards