Powder coating is a new type of 100% solid powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.
A maior parte do revestimento em pó é usada por pulverização eletrostática na superfície do metal e, em seguida, cura no forno, formando eventualmente uma camada sólida.
Epoxy/Epoxy polyester/Polyurethane
Aluminium Profile Industry ; Windows and doors
Outdoor or indoor Furniture ; Architecture Construction
Aparelhos domésticos
| Amostra de Ensaio | Método de teste | Resultado do teste |
| Espessura do filme | ISO2360 | 60-80um |
| Dureza de lápis | ASTMD 3363 | H-2H |
| Dobrar | ISO1519 | ≤10mm |
| Teste de grade 1mm | ISO2409 | 0 CLASSE |
| Teste de Impulso | ASTMD2794 | Passar |
| Teste de Ventosa | ISO1520 | ≥8mm |
| Resistência ao calor por 1000 horas | ISO6270-1 | Estouro <1mm |
| Névoa salina 1000 horas | ISO9227 | Propagação da corrosão < 1 mm |
1.Under dry conditions,good ventilation at a temperature not exceeding 30 C,humidity<60%
2.Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
3.Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
4.Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
