Powder coatings for Automotive trim parts

Surface Finish Options Overview

รายละเอียดสินค้า*

MT-A2201 powders can be used for pillars and appliqués, roof racks, grille guards, bumpers, hitches, mirror housings, and wiper arms all require protection from the environment as well as being visually harmonious with the overall design of a vehicle. MT-A2201 powders are super durable (> two years Florida) and answer to the requested performance level specified by the OEMs.

คุณสมบัติของผง

เงื่อนไขการทดสอบ

The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.

การประเมินคุณสมบัติทางกายภาพของวัสดุ (Mechanical Tests)

การรักษาก่อน

Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A2201. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance. Aluminium parts require a chromate or chrome-free conversion pre-treatment.

การใช้งาน

MT-A2201 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.