MT-D3020 is a series of hyperdurable powder coatings designed to meet the most demanding architectural specification requirements in the world. MT-D3020 is also designed to provide excellent cosmetic and functional protection whilst exploiting the recognized benefits of powder coatings complying with Qualicoat Class 3 and AAMA2605 and EN12206 specifications.
| Tipikal na halaga | |
| Uri ng Kemikal | Fluoropolymer |
| Hitsura | Makinis Matt |
| Kakapalan | 1.2 – 1.7 g/cm³, depending on colour |
| Gloss (60°) | 15 – 30 GU |
| Pamamahagi ng laki ng butil | Suitable for electrostatic spray. |
| shelf buhay | 18 months below 25 °C |
| Mga Kundisyon sa Pag-iimbak | Under dry, cool (≤ 25°C) conditions (open boxes must be resealed) |
| Iskedyul ng paggamot | 20 – 35 min at 190°C 15 – 25 min at 200°C 10- 15 min at 210°C (object temperature) |
Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier. For maximum protection it is essential to pre-treat components prior to the application of them in accordance with the MT-D Approved Applicator Manual.
Powders can be applied by manual or automatic electrostatic spray equipment. All powders can show small color differences from batch to batch, this is normal and unavoidable. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect” and changes in aspect after recycling. Products with different codes should not be mixed even if same colour and gloss. Applicators and fabricators are advised to use a single batch for parts that will be assembled together. Differences are more likely with special effect powders. For more information, it is suggested to read the Metallic Applications Guidelines.
Ang mga resulta ay batay sa mekanikal at kemikal na mga pagsusuri na (maliban kung ipinahiwatig) ay isinagawa sa ilalim ng mga kondisyon ng laboratoryo at ibinibigay para sa patnubay lamang.
| Pre-paggamot | Chrome free Qualicoat/GSB approved pretreatment |
| Substrate | Aluminum (0.5-0.8 mm Al Mg1) |
| Iskedyul ng paggamot | 20 min sa 200°C (temperatura ng bagay) |
| Kapal ng pelikula | 50 – 80µm, ISO 2360 |
| Tipikal na halaga | Pamamaraan/pamantayan | |
| pagdirikit | Klase ng 0 | ISO 2409 (2 mm Crosshatch |
| Erichsen cupping | Pass Qualicoat class 3 requirements | ISO 1520 |
| flexibility | Pass Qualicoat class 3 requirements | ISO 1519 |
| Epekto pagtutol | Pass Qualicoat class 3 requirements | ISO 6272-2 (d/r) |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
