Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products with multiple varieties that are suitable for different requirements and coating characteristics. The product has excellent leveling, strong adhesion and good salt spray resistance.
Transparent powder
High transparency pure polyester transparent powder
Ordinary transparency pure polyester transparent powder
Base powder
High leveling pure polyester base powder
High leveling epoxy polyester mixed base powder
Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products specially designed for different requirements and coating characteristics.
Carton packaging, na may linya na may dalawang layer ng polyvinyl chloride plastic bags, netong timbang ng bawat kahon ay 20kg. Ang mga bagay na hindi mapanganib ay maaaring dalhin sa iba't ibang paraan, ngunit dapat na iwasan mula sa direktang sikat ng araw, kahalumigmigan at init, at pagkakadikit sa mga kemikal.
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
| Katangian | The product has excellent leveling, strong adhesion and good salt spray resistance. |
| Tukoy na gravity | 1.2~1.8g/cm’ (depending on the formula and color) |
| maliit na butil laki | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, and greater than 100 microns powder <0.5%. |
| Katatagan ng imbakan | Powder coatings for aluminum wheels should be stored in a dry and ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Transparent powder
| Mga item sa pagsusulit | Pamantayan o pamamaraan ng inspeksyon | Index ng inspeksyon |
| Hitsura | Visual na inspeksyon | Various board surface effects |
| EPEKTO | GB / T 1732 | ≥50Kg·cm |
| Baluktot | GB / T 6742 | ≤2mm |
| Pamangkin | GB / T 9753 | ≥6mm |
| Tigas | GB / T 6739 | ≥H |
| pagdirikit | GB / T 9286 | Antas 0 |
| Neutral salt spray resistance | GB / T 1771 | 800h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
Base powder
| Mga item sa pagsusulit | Pamantayan o pamamaraan ng inspeksyon | Index ng inspeksyon |
| EPEKTO | GB / T 1732 | ≥50Kg·cm |
| Baluktot | GB / T 6742 | ≤2mm |
| Pamangkin | GB / T 9753 | ≥6mm |
| Tigas | GB / T 6739 | ≥H |
| pagdirikit | GB / T 9286 | Antas 0 |
| Neutral salt spray resistance | GB / T 1771 | 800h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Mga kondisyon ng paggamot | Recommendation: acrylic transparent powder 180℃/10mins, pure polyester transparent powder 200℃/10mins or low temperature curing 180℃10mins, base powder 180℃/10mims. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
