This series of products uses polyester resin and epoxy resin as the main base material to make thermosetting powder coating.
Iba't ibang wrinkles, metal, pearlescent effects at mixed color, atbp.
Suitable for coating of various indoor products, widely used in any indoor purposes such as furniture, household appliances, industrial equipment, sports equipment, toys, hardware machinery, store shelves, lamps, etc.
Carton packaging, na may linya na may dalawang layer ng polyvinyl chloride plastic bags, netong timbang ng bawat kahon ay 20kg. Ang mga bagay na hindi mapanganib ay maaaring dalhin sa iba't ibang paraan, ngunit dapat iwasan sa direktang sikat ng araw, kahalumigmigan at init, at pagkakadikit sa mga kemikal.
Ang mga operator ay dapat magsuot ng dust mask habang ginagamit upang maiwasan ang paglanghap ng alikabok at mabawasan ang pangmatagalang pagkakadikit sa pagitan ng balat at powder coating. Maaaring hugasan ng sabon ang pintura na nakakabit sa balat.
| Tukoy na gravity | 1.4~1.8g/cm3 (depending on the formulation and color) |
| maliit na butil laki | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Pabagu-bago ng isip | |
| Pagpapalambot point | 60~95℃ varies depending on the color gloss |
| Katatagan ng imbakan | Epoxy/polyester powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Mga item sa pagsusulit | Pamantayan o pamamaraan ng inspeksyon | Index ng inspeksyon |
| Hitsura | Visual na inspeksyon | Iba't ibang epekto sa ibabaw ng board |
| EPEKTO | GB / T 1732 | ≥50Kg·cm |
| Baluktot | GB / T 6742 | ≤2mm |
| Pamangkin | GB / T 9753 | ≥8mm |
| Tigas | GB / T 6739 | ≥H~2H |
| pagdirikit | GB / T 9286 | Antas 0 |
| Lumalaban sa spray ng asin | GB / T 1771 | 500h; Nakasulat na lugar: unidirectional rust ≤2.0mm; Unscribed area: walang abnormalidad |
| Halumigmig at paglaban sa init | GB / T 1740 | 500h Walang abnormalidad |
| Photoaging | Poor light resistance, not recommended for outdoor use | |
| Ang mga tagapagpahiwatig ng pagganap ng coating sa itaas ay maaaring bahagyang bumaba habang bumababa ang pagtakpan. | ||
| Pag-spray | Ang seryeng ito ng mga produkto ay angkop para sa mga sumusunod na paraan ng pag-spray: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Kapal ng patong: Gumamit sa pagitan ng 40~150 microns, ang inirerekomendang kapal ng pelikula ay 50~80 microns. Average na saklaw: 10~12 square meters/kg, kapal ng pelikula 60 microns (kinakalkula batay sa 100% rate ng paggamit) | ||
| Mga kondisyon ng paggamot | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 140℃/30 minutes, 160℃/20分钟，180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
