Transparent na powder coating

Surface Finish Options Overview

Pangkalahatang-ideya ng produkto

This series of products is made of polyurethane or acrylic resin with curing agent, and is a transparent powder coating with high transparency and excellent flatness resistance.

Application lugar

Pangunahing application:

Automobile topcoat and exterior partsAutomobile wheel coatingIndoor and outdoor metal parts protectionHigh-performance finish layer for various metal appliances

Mga karaniwang sitwasyon ng aplikasyon:

High-end metal furnitureHigh-end hardware productsMga piyesa ng bisikletaHigh-end door handlesHigh-end craft productsGloss protection layer for metal powder coatings

Teknikal na parameter

Mga pangunahing katangian ng pulbos:

Partikular na gravity: 1.1~1.3g/cm³

Volatile matter: <0.5%~2% (depending on product type)

Flow rate: >130 (with good fluidization and conveying performance)

Mga tampok

	kategorya	Mga tampok	Mga kondisyon ng paggamot
PE/TGIC	Polyester/TGIC	Good leveling, excellent weather resistance, good transparency	200℃/10min
	Polyester/TGIC	Good leveling, excellent weather resistance, good transparency	200℃/10min
PU	uri ng polyurethane	Good leveling, excellent weather resistance, good transparency	200℃/15min
Acrylic/PU	Mixed acrylic	Good leveling, excellent weather resistance, excellent weather resistance, solvent resistance	200℃/10min
Acrylic	Acrylic	Excellent weather resistance and solvent resistance, Impact resistance can reach ±10kg.com. 200℃/10min 170℃/20min	170℃/20min

Pagganap ng patong

Bagay	Pamantayan ng sanggunian	PE/TGIC	PU type	Acrylic/PU	Acrylic
Hitsura	GB5237.4	Patag	Patag	Patag	Patag
Leveling	Q/TXSLD01-03	Baitang C	Baitang B	Baitang B	grade A
Aninaw	Q/TXSLD01-03	Baitang B	Baitang B	Baitang B	grade A
EPEKTO	GB / T1732-93	±50kg.cm	±50kg.cm	±50kg.cm	±50kg.cm
Pamangkin	GB / T9753-88	> 6mm	> 6mm	> 6mm	> 6mm
pagdirikit	GB / T9286-98	Grade 0	Grade 0	Grade 0	Grade 0
Baluktot	GB6742-86	Φ2mm	Φ2mm	Φ2mm	Φ2mm
Indentation tigas	GB9275	≥ 80	≥ 80	≥ 80	≥ 80
Pagsubok ng spray ng asin	GB / T1771-91	No change after 1000 hours	No change after 1000 hours	No change after 1000 hours	No change after 1000 hours
Pagsubok sa wet heat	GB / T1740-79	1000 hours level 1	1000 hours level 1	1000 hours level 1	1000 hours level 1
Aging test Light aging	Light aging: ASTMG154QUV0.78w/m2@340nm500h	Gloss retention rate ≥80%	Gloss retention rate ≥80%	Gloss retention rate ≥80%	Gloss retention rate ≥80%
Note: The above tests all use 0.7mm thick degreased aluminum plates with a film thickness of 60-80μm; the above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, substrate, pretreatment, and spraying process.

Mga pagtutukoy sa pag-iimpake

Standard packaging: carton lined with plastic bag

Net weight per box: 20kg

Transportation classification: non-hazardous goods

Mga tagubilin sa kaligtasan

Raw materials do not contain highly toxic substances

Pag-iingat para magamit:

Avoid inhalation of dust (it is recommended to wear a dust mask)Reduce direct skin contactSkin contamination can be washed with soapAvoid contact with chemicals during storage