This series of products uses polyester resin and epoxy resin as the main base material to make thermosetting powder coating.
Diverse rughe, metallu, effetti perlescenti è culori mischiati, ecc.
Suitable for coating of various indoor products, widely used in any indoor purposes such as furniture, household appliances, industrial equipment, sports equipment, toys, hardware machinery, store shelves, lamps, etc.
Imballaggio in cartone, rivestitu di dui strati di sacchetti di plastica di cloruru di polivinile, u pesu nettu di ogni scatula hè di 20 kg. L'articuli micca periculosi ponu esse trasportati in diversi modi, ma devenu esse tenuti luntanu da a luce diretta di u sole, l'umidità è u calore, è da u cuntattu cù i prudutti chimichi.
L'operatori devenu purtà maschere antipolvere durante l'usu per evità di inalà a polvere è minimizà u cuntattu à longu andà trà a pelle è u rivestimentu in polvere. A pittura attaccata à a pelle pò esse lavata cù u sapone.
| Gravità specifica | 1.4~1.8g/cm3 (depending on the formulation and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Materia volatile | |
| Puntu di softenimentu | 60~95℃ varies depending on the color gloss |
| Stabilità di almacenamiento | Epoxy/polyester powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Test items | Norma o metudu d'ispezione | Indice d'ispezione |
| Aspettu | Spezzione visuale | Diversi effetti di superficia di tavula |
| Impact | GB / T 1732 | ≥50Kg·cm |
| Curdisci | GB / T 6742 | ≤2mm |
| Coppiatura | GB / T 9753 | ≥8mm |
| durezza | GB / T 6739 | ≥H~2H |
| adhesion francese | GB / T 9286 | Level 0 |
| Resistente à a spruzzatura di sale | GB / T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Resistenza à l'umidità è à u calore | GB / T 1740 | 500h Nisuna anomalia |
| Fotoaging | Poor light resistance, not recommended for outdoor use | |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spruzzà | Questa seria di prudutti hè adatta per i seguenti metudi di spruzzatura: spruzzatura elettrostatica corona; spruzzatura elettrostatica per attritu; spruzzatura à lettu fluidizatu elettrostaticu; rivestimentu à immersione à caldu à lettu fluidizatu. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. Average coverage: 10~12 square meters/kg, film thickness 60 microns (calculated based on 100% usage rate) | ||
| Cundizioni di curazione | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 140℃/30 minutes, 160℃/20分钟，180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
