This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting powder coating.
Diverse rughe, metallu, effetti perlescenti è culori mischiati, ecc.
Suitable for various long-term outdoor exposure product coating:
1. Apparecchi per a casa: outdoor units of air conditioners, indoor appliances and lamps with high lighting conditions;
2. Construction industry applications: colorful curtain walls, door and window frames, ceilings with high lighting conditions;
3. Traffic facilities: highway guardrails and grilles; 3. Auto parts, sports facilities, fitness equipment, gas station equipment, and courtyard facilities.
Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-dangerous goods can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
L'operatori devenu purtà maschere antipolvere durante l'usu per evità di inalà a polvere, è minimizà u cuntattu à longu andà trà a pelle è u rivestimentu in polvere. A pittura attaccata à a pelle pò esse lavata cù u sapone.
| Gravità specifica | 1.4~1.8g/cm” (depending on the formula and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Materia volatile | |
| Puntu di softenimentu | 60~95℃ varies depending on the color gloss |
| Stabilità di almacenamiento | Polyester/TGIC powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60″), the storage temperature should be below 30℃. |
| Test items | Norma o metudu d'ispezione | Indice d'ispezione |
| Aspettu | Spezzione visuale | Diversi effetti di superficia di tavula |
| Impact | GB / T 1732 | ≥50Kg·cm |
| Curdisci | GB / T 6742 | ≤2mm |
| Coppiatura | GB / T 9753 | ≥8mm |
| durezza | GB / T 6739 | ≥H~2H |
| adhesion francese | GB / T 9286 | Level 0 |
| Resistenza neutra à a spruzzatura salina | GB / T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Resistenza à l'umidità è à u calore | GB / T 1740 | 500h Nisuna anomalia |
| Resistenza artificiale à l'invecchiamentu à l'intemperie | GB / T 1865 | 800h; Scolorimentu ≤2 livellu; Perdita di lucentezza ≤2 livellu |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spruzzà | Questa seria di prudutti hè adatta per i seguenti metudi di spruzzatura: spruzzatura elettrostatica corona; spruzzatura elettrostatica per attritu; spruzzatura à lettu fluidizatu elettrostaticu; rivestimentu à immersione à caldu à lettu fluidizatu. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. Average coverage: 10~12 square meters/kg, film thickness 60 microns (calculated based on 100% usage rate) | ||
| Cundizioni di curazione | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 160C/20 minutes, 180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
