This series of products uses polyester resin and epoxy resin as the main base material to make thermosetting powder coating.
Razne bore, metal, biserni efekti i miješane boje itd.
Suitable for coating of various indoor products, widely used in any indoor purposes such as furniture, household appliances, industrial equipment, sports equipment, toys, hardware machinery, store shelves, lamps, etc.
Kartonska ambalaža, obložena s dva sloja plastičnih vrećica od polivinilklorida, neto težina svake kutije je 20 kg. Neopasne stvari mogu se prevoziti na različite načine, ali ih treba držati podalje od izravne sunčeve svjetlosti, vlage i topline te kontakta s kemikalijama.
Operateri bi trebali nositi maske za prašinu tijekom upotrebe kako bi izbjegli udisanje prašine i smanjili dugotrajni kontakt između kože i praškastog premaza. Boja koja se nađe na koži može se oprati sapunom.
| Specifična gravitacija | 1.4~1.8g/cm3 (depending on the formulation and color) |
| Veličina čestice | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Isparljiva tvar | |
| Točka omekšavanja | 60~95℃ varies depending on the color gloss |
| Stabilnost skladištenja | Epoxy/polyester powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Ispitni predmeti | Standard ili metoda inspekcije | Indeks inspekcije |
| Izgled | Vizualni pregled | Razni efekti površine ploče |
| Utjecaj | GB / T1732 | ≥50 kg·cm |
| Savijanje | GB / T6742 | ≤2mm |
| Proces puštanja krvi | GB / T9753 | ≥8mm |
| Tvrdoća | GB / T6739 | ≥H~2H |
| adhezija | GB / T9286 | Razina 0 |
| Otporan na slani sprej | GB / T1771 | 500 h; Urezano područje: jednosmjerna hrđa ≤2.0 mm; Neurezano područje: bez abnormalnosti |
| Otpornost na vlagu i toplinu | GB / T1740 | 500 sati Nema abnormalnosti |
| Fotostarenje | Poor light resistance, not recommended for outdoor use | |
| Gore navedeni pokazatelji učinkovitosti premaza mogu se neznatno smanjiti kako se sjaj smanjuje. | ||
| Prskanje | Ova serija proizvoda prikladna je za sljedeće metode prskanja: elektrostatičko prskanje koronom; elektrostatičko prskanje trenjem; elektrostatičko prskanje u fluidiziranom sloju; vruće uranjanje u fluidiziranom sloju. | |
| Debljina premaza: Koristiti između 40~150 mikrona, preporučena debljina filma je 50~80 mikrona. Prosječna pokrivenost: 10~12 četvornih metara/kg, debljina filma 60 mikrona (izračunato na temelju 100%-tne upotrebe) | ||
| Uvjeti stvrdnjavanja | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 140℃/30 minutes, 160℃/20分钟，180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
