This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting powder coating.
Razne bore, metal, biserni efekti i miješane boje itd.
Suitable for various long-term outdoor exposure product coating:
1. Kućanski aparati: outdoor units of air conditioners, indoor appliances and lamps with high lighting conditions;
2. Construction industry applications: colorful curtain walls, door and window frames, ceilings with high lighting conditions;
3. Traffic facilities: highway guardrails and grilles; 3. Auto parts, sports facilities, fitness equipment, gas station equipment, and courtyard facilities.
Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-dangerous goods can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Operateri bi trebali nositi maske za prašinu tijekom upotrebe kako bi izbjegli udisanje prašine i smanjili dugotrajni kontakt između kože i praškastog premaza. Boja koja se nađe na koži može se oprati sapunom.
| Specifična gravitacija | 1.4~1.8g/cm” (depending on the formula and color) |
| Veličina čestice | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Isparljiva tvar | |
| Točka omekšavanja | 60~95℃ varies depending on the color gloss |
| Stabilnost skladištenja | Polyester/TGIC powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60″), the storage temperature should be below 30℃. |
| Ispitni predmeti | Standard ili metoda inspekcije | Indeks inspekcije |
| Izgled | Vizualni pregled | Razni efekti površine ploče |
| Utjecaj | GB / T1732 | ≥50 kg·cm |
| Savijanje | GB / T6742 | ≤2mm |
| Proces puštanja krvi | GB / T9753 | ≥8mm |
| Tvrdoća | GB / T6739 | ≥H~2H |
| adhezija | GB / T9286 | Razina 0 |
| Otpornost na neutralnu slanu maglu | GB / T1771 | 500 h; Urezano područje: jednosmjerna hrđa ≤2.0 mm; Neurezano područje: bez abnormalnosti |
| Otpornost na vlagu i toplinu | GB / T1740 | 500 sati Nema abnormalnosti |
| Otpornost na umjetno starenje zbog vremenskih uvjeta | GB / T1865 | 800 sati; Promjena boje ≤2 stupnja; Gubitak sjaja ≤2 stupnja |
| Gore navedeni pokazatelji učinkovitosti premaza mogu se neznatno smanjiti kako se sjaj smanjuje. | ||
| Prskanje | Ova serija proizvoda prikladna je za sljedeće metode prskanja: elektrostatičko prskanje koronom; elektrostatičko prskanje trenjem; elektrostatičko prskanje u fluidiziranom sloju; vruće uranjanje u fluidiziranom sloju. | |
| Debljina premaza: Koristiti između 40~150 mikrona, preporučena debljina filma je 50~80 mikrona. Prosječna pokrivenost: 10~12 četvornih metara/kg, debljina filma 60 mikrona (izračunato na temelju 100%-tne upotrebe) | ||
| Uvjeti stvrdnjavanja | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 160C/20 minutes, 180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
